
What does the KS-OFWB test?
The bend, or winding, performance of optical fibre cable and cable elements to IEC 60794-1-2 Method E11, wrapping the sample around a test mandrel in U-bend and S-bend configurations.
How is one cycle carried out?
The sample is wound in a close helix around the mandrel at a uniform rate, held under tension so it contours the mandrel, then unwound. One wrapping plus one unwrapping counts as one cycle.
Which mandrels and speeds are available?
Drive mandrels of D200 and D300 work against a D300 slave mandrel, whose position adjusts over 0–250 mm for different wrap paths. Winding runs 2–20 cycles/min clockwise or anticlockwise at a winding velocity of 12 r/min.
How is tension applied and how many cycles can be preset?
A 5 kg weight bracket carries one 5 kg and one 2.5 kg increment to load the cable. Bending cycles are programmable from 1 to 9999.
What are the installation requirements?
Frame 1000 x 720 x 1300 mm and console 400 x 300 x 800 mm, powered by a 3-phase 4-wire 50 Hz supply at 1 kW.